1 1 2 pipe flange-manufacture,factory,supplier from China

Class is marked with 6 pressure ratingsThey are: Class 150; Class 300; Class 600; Class 900; Class 1500; Class 2500Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.

1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

This Published Document is the UK implementation of EN 1092‑1:2018. Itsupersedes BS EN 1092‑1:2007+A1:2013, which is withdrawn.1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:BS4504 2.

The tabulated ratings for welding neck flanges areindependent of components to which they may be attached, and the pressure rating of the flange shall not be exceeded. Attachment welds should be made in accordance with the applicable code or regulation. See para. 6.7 and Figs. 1 through 3 for weld end dimensional requirements.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

It should be noted that this standard does not cover all flange sizes covered by the above DIN Standards.For flange dimensions not specified here, refer to DIN 2501-1. 1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.

Face finish: The finish on the face of flange is measured as an Arithmetical Average Roughness Height(AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH-500AARH(3.2Ra to 12.5Ra). Other finishes are available on requst, for example 1.6 Ra max,1.6/3.2 Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range 3.2/6.3Ra is most common.Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3.

Flange drills in EN1092-1 are generally the same as in BS4504 and DIN 2501, but the scope of EN1092-1 is wider. This manual includes tables EN1092-1 and BS4504. En 1092-1 for steel flanges, EN1092-2 for cast and ductile iron flanges1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Another layer of carbon steel flange means: according to the size and tolerance range required by the national standard production of flanges, different from the flange pieces not produced according to the standard size is also called two standard flanges (some people call non-standard flanges are incorrect), usually some unscrupulous merchants will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or scrap steel1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

EN1092-1 FLANGESize range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking             type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

 DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

Model NO.1/2"--72"Manufacturing WayForgingPressureClass150 / Class300 / Class600 /Class900CertificationISO / CESurface TreatmentAnti-Rusting Oil / Black PaintingPackingPlywood Cases or PalletsQualityStrict Quality Control SystemSampleMOQ5 PCSManufacturer or NotManufacturerDelivery Time15-25days Depenging on The Order QuantityApllicationWater / Gas / OilCustomized ServiceCustomized Product Can Be MadeExport ExperienceOver 15year Exporting ExperienceShippingby Sea / by Air / by TrainRaw MaterialA105 Transport PackagePlywood Case or PalletsSpecification1/2"-72"TrademarkDZ

1. Each flange or pipe fittings is wiped after ultrasonic cleaning.2. Each flange or pipe fittings is individually packaged with bubble protective film and placed in a wooden box.3. All products are packed in plywood boxes. For larger size flanges, packed in plywood pallets. Or you can customize the packaging by yourself.4. Shipping marks can be made as required5. Product label can be engraved or printed.

Blind Flanges. Blind flanges need not be facedin the center if, when this center part is raised, its diameter is at least 25 mm (1 in.) smaller than the inside diameter of fittings of the corresponding pressure class, as given in Tables 9 and 12 (Tables II-9 and II-12) or25 mm (1 in.) smaller than the mating pipe inside diameter.  1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Rat ings for welding neck flanges covered by this Standard are based upon their hubs at the welding endhaving thickness at least equal to that calculated for pipe having 276 MPa (40,000 psi) specified minimum yieldstrength.1 In order to ensure adequate flange hub thick ness for flange sizes NPS 2 and larger, the bore of awelding neck flange, dimension B in the various dimen sional t ables, shall not exceed Bmax det ermined asfollows: 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

When building a pipeline, the length of the pipes used are not always known. By manufacturing the pipe separate from the flange plate, the welders can cut the pipe to length and weld a flange plate in place to join the pipes at any needed length. The plates can also be welded to the pipe on a slight bias, allowing two pipes to be joined that may not be precisely lined up.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3.

This St andard covers pressure–t emperature  ratings, materials, dimensions, tolerances, marking, testing, and methods of designat ing openings for pipe  flanges and flanged fittings. Included are                                             Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995.

ASME/ANSI B16.5 provides dimensions and tolerances for flanges in pipe sizes from1/2" through 24" and in pressure classes from 150 lb through 600 lb.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.

flange connections, which are used for two kinds of pipes, fittings, or devices, are first fixed in a flange flange, and between the two flanges, flange pads are bolted together, which completes the connection. Some pipe fittings and equipment have their own flange, also belong to the flange connection. Flange connection is an important connection mode in pipeline construction. Flange connection is easy to use and can withstand greater pressure. Flange connection is widely used in industrial pipeline. In the home, the pipe diameter is small, and is low pressure, not visible flange connection.

ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings -Class 125 Flanges - outside and inside diameters, bolt circles, numbers and diameters of bolts  1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7.

A blind flange is a solid flange as shown below. The purpose of these is to block off a section ofpipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3.