DIN Flange-manufacture,factory,supplier from China

(Total 24 Products for DIN Flange)

DIN 2573 PN6 Flange

DIN 2573 PN6 Flange

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

DIN Flanges

DIN Flanges

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

blind

EN1092-1 Blind

It should be noted that this standard does not cover all flange sizes covered by the above DIN Standards.For flange dimensions not specified here, refer to DIN 2501-1. 1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

DIN 2642 PN10 RST37.2

Surface treatment: Antirust oil, black / yellow / transparent / electric galvanized / hot galvanized1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

plate

DIN 2573 PN6 Plate flange

1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

plate

DIN 2502 PN16 Plate flange

A flanged joint is composed of separate and independent, although interrelated components: the flanges, gasket, and bolting, which are assembled by another influence, the assembler. Proper controls must be exercised in the selection and application for all these elements to attain a joint that has acceptable leak tightness. Special techniques1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

type01

EN1092-1-01

DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545 welding neck falnge DIN2631, 2632,2633,2634,2635 blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40 threaded falnge DIN2565,2566,2567,2567 loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

type05

EN1092-1-05

DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545 welding neck falnge DIN2631, 2632,2633,2634,2635 blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40 threaded falnge DIN2565,2566,2567,2567 loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

plate

DIN 2576 PN10 Plate flange

(1) flanges and flanged fittings made from cast orforged materials (2) blind flanges and certain reducing flanges made from cast, forged, or plate materials1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

BS4504 PN16 SO Flange

BS4504 PN16 SO Flange

In addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 also includes flanges up to PN 400. 1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order

SORF

BS4504 PN16 SO Flange

In addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 alsoincludes flanges up to PN 400. 1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:BS4504 2.

WNRF

DIN 2632 PN10 Weld Neck flange

Types we can supply: WN, SO, BL, plate, thread, socket and other special shapes9, Kinds of forging: a) Free forging ;b) Die forging ;c) Rolling;1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

bs4504

BS4504 SORF Flange

whereas ISO 7005-1 included in its scope both the original DIN based flanges and also the originalANSI/ASME based flanges, EN 1092-1 contains only the PN based flanges. CEN/TC 74 has produced a separate series of standards, EN 1759-1, EN 1759-3 and EN 1759-4, dealing with the ANSI/ASME based flanges in their original Class designations;1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Special flange

Special Flange

Material:But according to ASTM, JIS, DIN, GB standardASTM: 304, 304 L, 316 L, 316, and 316 Ti, 317, 317 L, 321, 321 H, etcJIS: SUS304, SUS304L, SUS316 SUS316L, SUS316Ti, SUS317L, SUS321, SUS321H, etcDIN: 1.4301, 1.4306, 1.4401, 1.4435, 1.4571, 1.4436, 1.4438, 1.4541, etcGB: 0 Cr18N9, 00 Cr19Ni101. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

SOFF

BS4504 PN16 SO

The p/T ratings of this standard have been reduced in many cases by either limiting the lowertemperature ratings which can no longer exceed the PN value, or by increasing the rate at which allowable pressures shall reduce with increase in temperature;2) in addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 also includes flanges up to PN 400.1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Semi-finished flange

Semi-Finished Flange

1,Carbon steel, stainless steel and alloy flanges, are manufactured as per the standardsof BS, ANSI, JIS, DIN, and UNI.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.

BS4504

BS4504 DIN Pn16 Plate RF

EN1092-1 FLANGE BS4504Size range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: &n

HDG flange

DIN2576 PN10 Hot galvanizing

whereas ISO 7005-1 included in its scope both the original DIN based flanges and also the originalANSI/ASME based flanges, EN 1092-1 contains only the PN based flanges. CEN/TC 74 has produced a separate series of standards, EN 1759-1, EN 1759-3 and EN 1759-4, dealing with the ANSI/ASME based flanges in their original Class designations;1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

WNRF

EN1092-1-type11

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

WNRF

EN1092-1 Weld Neck

Flange drills in EN1092-1 are generally the same as in BS4504 and DIN 2501, but the scope of EN1092-1 is wider. This manual includes tables EN1092-1 and BS4504. En 1092-1 for steel flanges, EN1092-2 for cast and ductile iron flanges1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Flat flange

DIN 2502 PN16

Carbon Steel /Stainless Steel/ANSI B16.5/DIN2576/En1092 flange Class 150/300/600 PN10Slip on/welding neck/socket welding/lap joint/blind flange pipe fitting1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Blind

Gost 12820 PN16 Blind

We have more than 15 years’s experiences on production and export of all kinds of plate flange,flat flange,slip on flange, welding neck flange,long welding neck flange,blind flange,socket welding flange,threaded flange, screwed flange, lap joint flange. Company produces carbon steel flanges according to the strandard of ANSI/ASME,DIN,JIS,BS,GB,SH. We can also produce Non-standard flanges as per the drawings and samples provided by customers. At present we have acquired ISO9001:20001. Standard:GOST 12820- 80 GOST 12821- 80 2.

Custom flange

Custom Flange

Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.

Custom flange

Custom Flange

Used for the connection between the tube end in chemical, construction, water supply, drainage, oil and gas, light and heavy industrial, refrigeration, sanitation, plumbing, fire protection, electrical, aerospace, shipbuilding and other infrastructure projects

Relate News

shipment

Large Size Flange Ready to Ship

We abide by using the everlasting goal: Quality-first, honesty-based. We will continuously introduce superior science and boost new merchandise to provide wonderful ones with greater great and higher provider for our clients, We definitely want to set up enterprise relationship with all the clients from the world to cooperate with us for higher improvement and gorgeous .

flange

Introduction to Flanges

Introduction to flangesFlange, also called flange plate. Flange is to make the pipe and pipe connected to each other, connected to the pipe end, also useful in the equipment import and export flange, used for the connection between two equipment, such as reducer flange, flange connection or flange joint, refers to the flange, gasket and bolt are connected to each other as a group of sealing structure detachable connection, pipe flange refers to the pipe device rematching pipe flange, Used in equipment refers to the import and export flange of the equipment, flange has holes, bolts to

Flanges

Advantages of Flanges

Flanges are helpful to connect pumps, valves, pipes, and other parts to form a piping system. Flanges are typically welded or thread screwed to connect. The use of flanges allows a person for maintenance and easy repair of the pipe system. Instead of taking out the whole pipe for inspection, the smaller section of the pipe can be inspected to find the fault with the help of a flange. The flange connection point allows for reinforcement of the system, as well as pipe cleaning and easy inspection.You can join the two flanges together by bolts using a gasket between them for seal.

certification

ISO9001:2000 Quality System Certificate

A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.

Jinan Jiang Hua Forging Machinery Co.,Ltd

Jinan Jiang Hua Forging Machinery Co.,Ltd

Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position : with Jinan International Airport to its west and Qingdao Port to its east. The company covers 480,000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians . Annual capacity is more than 10000 tons .

x

Submitted successfully

We will contact you as soon as possible

Close

Submitted successfully

We will contact you as soon as possible

Close

Index