EN1092-1 Weld Neck-manufacture,factory,supplier from China

Flange drills in EN1092-1 are generally the same as in BS4504 and DIN 2501, but the scope of EN1092-1 is wider. This manual includes tables EN1092-1 and BS4504. En 1092-1 for steel flanges, EN1092-2 for cast and ductile iron flanges1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

The tabulated ratings for welding neck flanges areindependent of components to which they may be attached, and the pressure rating of the flange shall not be exceeded. Attachment welds should be made in accordance with the applicable code or regulation. See para. 6.7 and Figs. 1 through 3 for weld end dimensional requirements.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

Rat ings for welding neck flanges covered by this Standard are based upon their hubs at the welding endhaving thickness at least equal to that calculated for pipe having 276 MPa (40,000 psi) specified minimum yieldstrength.1 In order to ensure adequate flange hub thick ness for flange sizes NPS 2 and larger, the bore of awelding neck flange, dimension B in the various dimen sional t ables, shall not exceed Bmax det ermined asfollows: 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

Weld neck flange, slip on flange, blind flange, tube sheet, threaded flange, socket weld flange, plate flange, spectacle blind, LWN, Orifice flange, anchor flange.1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order

EN1092-1 FLANGESize range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking             type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

weld neck flange, slip on flange, blind flange, lap joint flange, loose flange, plate flange , threaded flange, socket weld flange, orifice flange, anchor flange, tubesheet flange,spectacle blind, paddle space, paddle blank, long weld neck flange,  customizedProduct Specification:1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.

 DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.

This Published Document is the UK implementation of EN 1092‑1:2018. Itsupersedes BS EN 1092‑1:2007+A1:2013, which is withdrawn.1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:BS4504 2.

1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

It should be noted that this standard does not cover all flange sizes covered by the above DIN Standards.For flange dimensions not specified here, refer to DIN 2501-1. 1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

Weld neck flange, slip on flange, blind flange, lap joint flange, loose flange, plate flange , threaded flange, socket weld flange, orifice flange, anchor flange, tubesheet flange,spectacle blind, paddle space, paddle blank, long weld neck flange,  customized1. Standard:JIS B2220 2. Type:SOP; SOH3. Pressure Class:5k;10k;16k;40k4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS4007. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

1. Each flange or pipe fittings is wiped after ultrasonic cleaning.2. Each flange or pipe fittings is individually packaged with bubble protective film and placed in a wooden box.3. All products are packed in plywood boxes. For larger size flanges, packed in plywood pallets. Or you can customize the packaging by yourself.4. Shipping marks can be made as required5. Product label can be engraved or printed.

Another layer of carbon steel flange means: according to the size and tolerance range required by the national standard production of flanges, different from the flange pieces not produced according to the standard size is also called two standard flanges (some people call non-standard flanges are incorrect), usually some unscrupulous merchants will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or scrap steel1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

ANSI B16.5/ANSI B16.47/API 605 MSS SP44,AWWA C207-2007/ANSI B16.48DIN2503/2502/2576/2573/860296/86030/2565-2569/2527/2630-2638UNI6091/6092/6093/6094/6095/6096/6097/6098/6099JIS B2220/B2203/B2238/G3451GOST 1836/1821/1820BS4504EN1092SABS1123    1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Flange types:Weld NeckThis flange is circumferntially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications.Slip OnThis flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.BlindThis flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover.

The forging process of forged flange is generally composed of the following processes, i.e. selecting the process methods of cutting, heating, forming, cooling and forging after forging of high-quality steel billet, including free forging, die forging and fetal film forging. During production, different forging methods shall be selected according to the quality of forgings and the number of production batches1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3.

Types we can supply: WN, SO, BL, plate, thread, socket and other special shapes9, Kinds of forging: a) Free forging ;b) Die forging ;c) Rolling;1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Carbon Steel /Stainless Steel/ANSI B16.5/DIN2576/En1092 flange Class 150/300/600 PN10Slip on/welding neck/socket welding/lap joint/blind flange pipe fitting1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.