Specializing in the production of carbon steel flange-manufacture,factory,supplier from China

Flanges Introduction:A flange is a approach of connecting pipes, valves, pumps and other gear to form a pipework system. It additionally provides handy access for cleaning, inspection or modification. Flanges are typically welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Another layer of carbon steel flange means: according to the size and tolerance range required by the national standard production of flanges, different from the flange pieces not produced according to the standard size is also called two standard flanges (some people call non-standard flanges are incorrect), usually some unscrupulous merchants will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or scrap steel1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

The forging process of forged flange is generally composed of the following processes, i.e. selecting the process methods of cutting, heating, forming, cooling and forging after forging of high-quality steel billet, including free forging, die forging and fetal film forging. During production, different forging methods shall be selected according to the quality of forgings and the number of production batches1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3.

Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.

     Carbon steel flange, that is, a flange plate or end flange connection made of carbon steel. It contains a flange made of carbon steel, called a carbon steel flange. Common materials are cast carbon steel grade WCB, forgings A105, or Q235B, A3, 10#, #20steel, 16 manganese, 45 steel, Q345B, etc.Usually to prevent rust flange surface has an electroplating layer (yellow zinc, white zinc, etc.), or brush antirust oil and spray antirust paint.Chinese national standard for carbon steel flange GB/T9119-2010 marine standard CB M1001-81 thermal power standard D-GD87-1101 1.

This St andard covers pressure–t emperature  ratings, materials, dimensions, tolerances, marking, testing, and methods of designat ing openings for pipe  flanges and flanged fittings. Included are                                             Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995.

We have more than 15 years’s experiences on production and export of all kinds of plate flange,flat flange,slip on flange, welding neck flange,long welding neck flange,blind flange,socket welding flange,threaded flange, screwed flange, lap joint flange. Company produces carbon steel flanges according to the strandard of ANSI/ASME,DIN,JIS,BS,GB,SH. We can also produce Non-standard flanges as per the drawings and samples provided by customers. At present we have acquired ISO9001:20001. Standard:GOST 12820- 80  GOST 12821- 80 2.

Flanged fittings with rating class designation 150 and 300 in sizes NPS 1 ⁄2 through NPS 24, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch unitsProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.

Forged Carbon Steel Stainless Steel Pipe Flanges

In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.

PVC pipes,pipe fittings and valves is widely used in water supply,chemical industry,water treatment,enviromental protection,pharmaceutical area etc.It has following advantages:Light weightHigh strengthLow resistanceCorrosion resistanceEasy installationLong service lifeLow costNon-toxic and sanitationProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004.

Features1. Material: steel,stainless steel, carbon steel2. Surface finish: polish, plated3. Machining: CNC4. Used for All Kinds of Industrial OEM Project1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Pressure–temperature ratings are maximum allowable working gage pressures in bar units at the temperatures in degrees Celsius shown in Tables 2-1.1 through  2-3.19 for the applicable material and class designation.  Tables II-2-1.1 through II-2-3.19 of Mandatory  Appendix II list pressure–temperature ratings using psi  units for pressure at the t emperature in degrees  Fahrenheit. For intermediate temperatures, linear interpolation is permitted. Interpolation between class designations is not permitted.  

Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.

flange connections, which are used for two kinds of pipes, fittings, or devices, are first fixed in a flange flange, and between the two flanges, flange pads are bolted together, which completes the connection. Some pipe fittings and equipment have their own flange, also belong to the flange connection. Flange connection is an important connection mode in pipeline construction. Flange connection is easy to use and can withstand greater pressure. Flange connection is widely used in industrial pipeline. In the home, the pipe diameter is small, and is low pressure, not visible flange connection.

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.

Flange drills in EN1092-1 are generally the same as in BS4504 and DIN 2501, but the scope of EN1092-1 is wider. This manual includes tables EN1092-1 and BS4504. En 1092-1 for steel flanges, EN1092-2 for cast and ductile iron flanges1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Product Specification:Heat treatment and surface treatment for forged steel sheaves will be performed according to customer's requirements.Material: stainless steel, carbon steel, alloy steel, titanium alloy, aluminum, copper. 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.

The p/T ratings of this standard have been reduced in many cases by either limiting the lowertemperature ratings which can no longer exceed the PN value, or by increasing the rate at which allowable pressures shall reduce with increase in temperature;2) in addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 also includes flanges up to PN 400.1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

1,Carbon steel, stainless steel and alloy flanges, are manufactured as per the standardsof BS, ANSI, JIS, DIN, and UNI.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.

JIS FALNGE Size ragne : 15A to 2000ADesign:         SOP, BIND, SOH,Puressure:   1K, 2K, 5K, 10K, 16K, 20K, 30K, 40KMaterial:        carbon steel SS400, stainless  steel SUS304, SUS316Coating :       rust-proof oil, cold  and hot galvanizePacking:       sea worthy plywooden case, woode

Blind Flanges. Blind flanges need not be facedin the center if, when this center part is raised, its diameter is at least 25 mm (1 in.) smaller than the inside diameter of fittings of the corresponding pressure class, as given in Tables 9 and 12 (Tables II-9 and II-12) or25 mm (1 in.) smaller than the mating pipe inside diameter.  1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.

Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.