1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Contact Now
In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.
Contact Now
EN1092-1 FLANGE BS4504Size range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: &n
Contact Now
EN1092-1 FLANGESize range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Contact Now
Pressure–temperature ratings are maximum allowable working gage pressures in bar units at the temperatures in degrees Celsius shown in Tables 2-1.1 through 2-3.19 for the applicable material and class designation. Tables II-2-1.1 through II-2-3.19 of Mandatory Appendix II list pressure–temperature ratings using psi units for pressure at the t emperature in degrees Fahrenheit. For intermediate temperatures, linear interpolation is permitted. Interpolation between class designations is not permitted.
Contact Now
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:JIS B2220 2. Type:SOP; SOH3. Pressure Class:5k;10k;16k;40k4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS4007. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.
Contact Now
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Contact Now
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.
Contact Now
1,Carbon steel, stainless steel and alloy flanges, are manufactured as per the standardsof BS, ANSI, JIS, DIN, and UNI.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.
Contact Now
JIS FALNGE Size ragne : 15A to 2000ADesign: SOP, BIND, SOH,Puressure: 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40KMaterial: carbon steel SS400, stainless steel SUS304, SUS316Coating : rust-proof oil, cold and hot galvanizePacking: sea worthy plywooden case, woode
Contact Now
DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545 welding neck falnge DIN2631, 2632,2633,2634,2635 blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40 threaded falnge DIN2565,2566,2567,2567 loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.
Contact Now
DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545 welding neck falnge DIN2631, 2632,2633,2634,2635 blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40 threaded falnge DIN2565,2566,2567,2567 loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.
Contact Now
Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.
Contact Now
Face finish: The finish on the face of flange is measured as an Arithmetical Average Roughness Height(AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH-500AARH(3.2Ra to 12.5Ra). Other finishes are available on requst, for example 1.6 Ra max,1.6/3.2 Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range 3.2/6.3Ra is most common.1. Standard:JIS B2220 2. Type:SOP; SOH3. Pressure Class:5k;10k;16k;40k4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:SS4007.
Contact Now
Used for the connection between the tube end in chemical, construction, water supply, drainage, oil and gas, light and heavy industrial, refrigeration, sanitation, plumbing, fire protection, electrical, aerospace, shipbuilding and other infrastructure projects
Contact Now
Flanged fittings with rating class designation400, 600, 900, and 1500 in sizes NPS 1⁄2 through NPS 24and flanged fittings with rating class designation 2500in sizes 1⁄2 through NPS 12 that are acknowledged inNonmandatory Appendix E in which only U.S.Customary units are provided 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Contact Now
Material:But according to ASTM, JIS, DIN, GB standardASTM: 304, 304 L, 316 L, 316, and 316 Ti, 317, 317 L, 321, 321 H, etcJIS: SUS304, SUS304L, SUS316 SUS316L, SUS316Ti, SUS317L, SUS321, SUS321H, etcDIN: 1.4301, 1.4306, 1.4401, 1.4435, 1.4571, 1.4436, 1.4438, 1.4541, etcGB: 0 Cr18N9, 00 Cr19Ni101. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Contact Now
Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.
Contact Now
Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.
Contact Now
The pressure marking specified in this standard is divided into PN marking and Class marking.PN marking has 12 pressure ratingsThey are: PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160; PN250; PN320; PN4001. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Contact Now
whereas ISO 7005-1 included in its scope both the original DIN based flanges and also the originalANSI/ASME based flanges, EN 1092-1 contains only the PN based flanges. CEN/TC 74 has produced
a separate series of standards, EN 1759-1, EN 1759-3 and EN 1759-4, dealing with the ANSI/ASME
based flanges in their original Class designations;1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Contact Now
The thread is also called British Standard Whitworth (BSW) and British Standard Fine (BSF)in Great Britain and British standard pipe thread (BSP-BSPT). 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.
Contact Now
1.Each layer use plastic film and rubber sleeve to protect the surface2.Package by wooden case3.Shipping mark can make on request4.Markings on products can be laser or stamp.OEM is accepted1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8.
Contact Now
1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.
Contact Now
